Table of Contents
Advertisement
Inspection and Adjustment
Parking Brake
Inspection
1.
Pull tho parking brake lever with 196 N
(20
kgf, 44
Ibfl force to fully apply the parking brake.
The parking brake lover should be locked within the
specified number of
clicks.
Lever Locked Clicks; 2 - 6
Pulled with 196 N
f20 kg!, 44
Ibtl
---r------------~--
;
2.
Adjust the parking brake
if the lever
clicks
are out of
specification.
Adjustment
1.
Raise the rear wheels off the ground, and support
the vehicle on safety stands.
Blo<:k the front _ . before jacking
2.
Remove the parking brake
cover.
19-6
3.
Release the parking brake
lever.
ADJUSTING NUT
4.
Adjust tho parking brake by turning the adjusting
nut.
5.
Check that the parking brakes do not drag when the
rear wheels are
turned.
Readjust
if
necessary.
6.
Make sure the parking brakes are fully applied when
the parking brake lever is pulled up fully.
7.
Install tho parking brake cover.
Advertisement
Table of Contents
Troubleshooting
