Honda CR-V 1997 Service Manual page 829

Front Driveshafts
Reassembly (cont'd)
8. Fit the boot ends onto the drivBshaft and outboard
joint.
OUTBOARD BOOT
ITPE!--:~~~~~~~
~~~'OlrrBOAIRDBOOT
OUTBOARD BOOT
OUTBOARD JOINT
9. Install the boot bands.
• For all '97 models and '98 USA models, go to
step 13.
• For '98 Canada models and all '99 - 00 models,
go to step 10.
10. Set the ear clamp band by threading the tab into the
holes of the band.
TAB
16-14
EAR CLAMP BAND
Replace .
11. Close the ear portion of the band with a commercially
available boot band pincers KENT-MOORE J-35910 or
equivalent.
or equivalent
EAR PORTION
12. Check the clearance between the closed ear portion
of the band. If the clearance is not within the stan-
dard, close the ear portion of the band further.
6.0
mm
10.2'
in!
MAX
3.0
mm
(0.12
in!
MAX