Honda CR-V 1997 Service Manual page 1035

Dashboard
Dashboard Removal and Installation (cont'd)
7. Disconnect the connectors and harness clips.
11- : Bolt
toC8tions
» , 5 . , 1 (>,1
8 x 1.25 mm
~!!!!l!!!!j!!j!J ~~ :~~:2.2
kgf·m.
PROTECTIVE
TAPE
HARNESS
CLIPS
8. Remove the bolts, then lift and remove the dashboard.
DASHBOARD
CAUTION: Use protective tape on the bottom of the front pillar trim.
9. Installation is the reverse ofthe removal procedure.
NOTE:
• Make sure the dashboard fits onto the guide pins correctly.
FRONT PASSENGER'S
CONN£CTOR
CONNECTOR
• Before tightenin g the bolts, make sure the dashboard wire harnesses are not pinched.
• Make sure the connectors and antenn a lead are connected properly.
20-54
PROTECTIVE
A
A