Table of Contents
Advertisement
From page 24-72
I
Check for a short to ground in the side wire harness:
1.
Disconnect the left side wire harness 2P connector from
the SRS main harness 2P connector.
2. Connect the special tool (2 0) to the SRS main harness
2P connector.
3.
Erase the DTC memory.
4. Read the DTC.
Is DTC 3-5 indicated?
YES
NO
I
Short to ground in the left side wire harness; replace the
harness.
Check for a short to ground in the SRS main harness:
I. Disconnect the negative battery cable, and wait for three
minutes.
2. Disconnect the driver's and front passenger's airbags,
and front passenger's seat belt tensioner 2P connectors
(see page 24-23).
3.
Disconnect the SRS main harness l8P connector from
the SRS unit.
4. Remove the special tool (2
0)
from the SRS main harness
2P connector.
5. Check resistance between the No.4 terminal of the SRS
main harness l8P connector and body ground, and
between the No. 11 terminals of the SRS main harness
l8P connector and body ground. There should be 1 MO
or more.
Is the resistance as specified?
I
YES
NO
Faulty SRS unit; replace the SRS unit (see page 24-951.
I
Short to ground in the SRS main harness; replace the SRS
I
main harness.
LEFT SIDE WIRE
-\4g.r~~u
