Front Seat Removal And Installation - Honda CR-V 1997 Service Manual

Front Seat Removal and Installation
CAUTION: When prying with a flat-tip screwdriver, wrap
it
with protective tape to prevent damage.
NOTE: Take care not to scratch the body or tear the seat
covers.
1. Remove the seat track end cover, and remove the
bolts.
.. : Bolt locations
A~,3
8xl.25mm
22N·m
12.2 kgf·m,
16 (bUI)
B~, 1
SEAT TRACK
END COVER
10 x 1.25 mm
37N·m
13.8 kgf·m,
27 (bUtl
2. Lift up the driver's front seat, then disconnect the
seat belt switch connector and harness clips.
~:
Harness clip locations
, ,
,
o
SEAT BELT SWITCH
CONNECTOR
, , ,
o
3. Carefully remove the front seat through the door
opening.
NOTE: An assistant is helpful when removing the
front seat.
4. Installation is the reverse of the removal procedure.
FRONT SEAT NOTE: Make sure the seat belt switch connector is
SEAT TRACK
END COVER
A
connected properly (driver's front seat).
20-57