Cable Reel
Replacement (cont'd)
6.
Disconnect the
connectors
from the horn and cruise
control set/resume switches.
CONNECTOR
REEL
2P CONNECTOR
CRUISE CONTROL
SET/RESUME
SWITCH CONNECTOR
7.
Loosen the steering wheel bolt, then install a steering
wheel puller on the
steering
wheel and remove
it.
Note these items when removing the steering wheel:
•
Do not tap
on the
steering wheel or the steering
column
shaft when removing the steering wheel.
•
If you thread the puller bolts into the wheel hub
more than five threads,
the
bolts will hit the cable
reel and damage it. To prevent this, install a pair
of
jam nuts five threads up on each puller bolt.
STEERING WHEEL
STEERING WHEEL PUUER
(Comm ercially
available)
STEERING WHEEL BOLT
39 N-m 14.0 kgf·m, 29 IbUtl
PULLER BOLT
STEERING WHEEL BOLT
24-92
B. Remove the
column
covers.
UPPER COLUMN COVER
LOWER COlUMN
COVER
9. Disconnect the 3P [6P] connector between the main
wire hamess and cable reel sub-harness,
and
the 2P
connector between the cable reel and SRS main har·
ness.
CABLE REEL SUB
HARNESS
SRS MAIN HARllESS
2P CONNECTOR
3P 16PI CONNECTOR
I I:
'98
- 00 mod.l.
10.
Remove the
cable
reel from the
column.