Honda CR-V 1997 Service Manual page 623

From page 14-106
Check for continuity between the
B20
terminal and body ground.
and between the B22 terminal
and body ground.
Is there continuity?
YES
Check Shift Control Solenoid
Valve
A
for a Short Circuit:
1. Di sconnect the 2P connector
from the shift control solenoid
valve
NB
assembly.
2.
Check for continuity between
the 07 and B20 or B22 termi-
nals.
Is there co ntinuity?
NO
Measure Shift Control Solenoid
Valve A Resistance at the
Solenoid Connector:
Measure the resistance between
the No.1 terminal of the shift
co ntrol solenoid valve A / B
assembly connector and body
ground.
Is the resistance 12 - 25 n?
YES
Check for open in the wire
betw.en the 07 terminal and the
shift control solenoid valve A.
NO
YES
NO
PCM CONNECTORS
A 132P) B 125P) C 131P)
lG2 IBRN/BlK)
®
~
Wire side of female terminals
Repair open in the wires between
the 820 and 822 terminals and
ground IG10l).
D 116P)
SH A
IBLU/YEl)
.-------------~n~------~~_, ri n
A132P)
B 125P) C 131P)
lG1IBRN/BlK) lG2 IBRN/BlK)
Repair short to ground in the wire
between the 07 terminal and the
shift control solenoid valve A.
SHIFT
CONTROL SOLENOID
VALVE A/B ASSEMBLY CONNECTOR
Replace the shrtt control soFenoid
valve AlB as.sembly.
Terminal side of male terminals
(conl'd)
14-107