Honda CR-V 1997 Service Manual page 523

III
Position
Hydraulic pressure is not applied to the clutches. Power is not transmitted to the countershaft.
The countershaft is locked by the park pawl interlocking the park gear.
[jj] Position
Engine power transmitted from the torque converter drives the mainshaft, but hydraulic pressure is not applied to the
clutches. Power is not transmitted to the countershaft. The countershaft 4th gear is engaged with the reverse selector hub
and the countershaft by the reverse selector, when the shift lever is shifted in
[ID
position from ~ or
[Q]
position. The
countershaft reverse gear is engaged when shifted from
[BJ
position.
NOTE: The illustration shows the 4WD automatic transmission; power flow of the 2WD automatic transmission is identi-
cal to the 4WD except for parts related to the transfer assembly.
TOROUE CQIWE,RTI,R
SERVO VALVE/
SHIFT FORK SHAFT
COUNTERSHAFT
REVERSE GEAR
......... REVEIISE SELECTOR
HUB
(cont'dl
14-7