Honda CR-V 1997 Service Manual page 1379

From page 24-80
I
Check for a short to ground in the side wire harness:
1. Disconnect the right side wire harness 2P connector from
the SAS main harness 2P connector.
2. Connect the special tool (2
0)
to the SAS main harness
2P connector.
3. Erase the DTC memory.
4. Read the DTC.
Is OlC 4-5 indicated?
YES NO
\ Short to ground in the right side wire harness; replace
j
the harness.
Check for a short to ground in the SRS main harness:
1. Disconnect the negative battery cable, and wait for three
minutes.
2. Disconnect the driver's and front passenger's air bags,
and driver's seat belt tensioner connectors (see page 24-
231.
3. Disconnect the SAS main harness 18P connector from
the SAS unit.
••
Disconnect the special tool (2
m
from the SRS main har-
ness 2P connector.
5. Check resistance between the No.5 terminal of the SRS
main harness 18P connector and body ground, and
between the No. 12 terminal of the SAS main harness
18P connector and body ground. There should be 1 Mfl
or more.
Is the resistance as specified?
YES NO
Faulty SRS unit; replace the SRS unit (see page 24-951.
I
Short to ground in the SRS main harness; replace the SRS
I
main harness.
RIGHT SIDE WIRE
HARNESS
2P CONNECTOR
SRS SIMULATOR
LEADC
07TAZ - SZ5011A
and
SRS INFLATOR
SIMULATOR \
120JACKI
07SAZ - TB4011A
ro
SRS MAIN HARNESS
18P CONNECTOR
SRSUNIT
789C806
10 11 1 13
Wire side ot temale
terminals.
24-81