Honda CR-V 1997 Service Manual page 498

30. Hold the transfer shaft with a 14 mm Allen wrench
clamped in a bench vise.
NOTE: The locknut has left-hand threads.
TORQUE: liS N'm (12.0 kgf·m, 88.SlbHt)
TOROUE WRENCH
TRANSFER SHAFT
/
14 mm ALlEN WRENCH
31. Stake the locknut on the transfer shaft using a 3.5
mm punch.
PUNCH
3.0-3.5 mm
(0.12 - 0.141nl
Point to be
staked.
Total Starting Torque Inspection and Adjustment
32. Temporarily install transfer cover A without the 0 -
ring.
TRANSFER COVER A
~
'---aXl.25mm
@
24 N·m 12.4 kg/·m, 17 Ibf.ftl
33. Secure the transfer housing in a bench vise with
soft jaws. then rotate the companion flange several
times to
fit
the tapered roller bearing.
TORQUE WRENCH
34. Measure the total starting torqu e,
TOTAL STARnNG TORQUE:
1.70 - 2.0S N'm 117.3 - 21.2 kgf·cm, 15.0 - 1S.4Ibf·in)
+ Transfer Driven G88r Shaft Starting Torque Value
(wroto down in step 27).
(cont'd)
13-59