Honda CR-V 1997 Service Manual page 943

10. Connect the parking brake cable to the parking
brake lever.
11, Clean the threaded portions of clevises A and B.
Coat the threads of the clevises with grease. To
shorten the clevises. turn the adjuster bolt.
UPPER RETURN SPRING
ADJUSTER BOLT
_ emf
Apply rubber grease
to sliding surface.
SELF-ADJUSTER
LOWER R.,rIlR, .. SPRING
12. Hook the self-adjuster spring to the self-adjuster
lever first, then to the brake shoe.
13. Install the clevises and upper return spring noting
the installation direction. Be careful not to damage
the wheel cylinder dust covers.
14. Install the lower return spring.
15. Apply grease on each sliding surface. Keep grease
or oil off the brake linings. Wipe any excess grease
off the parts.
• Apply brake cylinder grease !PIN: 08733 - B020E)
or equivalent rubber grease to the sliding sur-
faces as shown.
. . . Sliding surface
• Apply Molykote 44MA to the brake shoe ends
and opposite edges of the shoes as shown.
. . . Opposite edge of the shoe
c.:> 0 Brake shoe ends
(Shoe side ends and backing
plate contact surface)
(conl'd)
19-19