Honda CR-V 1997 Service Manual page 607

Troubleshooting Flowchart - Interlock System - Key Interlock System
Ignition key cannot be moved
from ACe
(I)
position to LOCK (0)
position while pushing the igni-
tion key with the shift lever in
~
position, and the shift lever but·
ton released.
Check Key Interlock Solenoid
Operation :
1. Disconnect the ignition switch
connector
(6P).
2. Connect the NO. 4 terminal of
the ignition switch 6P ccnnee-
tor to the battery positive ter-
minai, and connect the No. 3
terminal to the battery nega-
tive terminal.
3. Check the key interlock sole-
noid operation. A clicking
sou nd shou ld be heard .
Does the key interlock
solenoid operate properly?
YES
Check Key
Int.~ock
Switch Oper-
ation:
I.
Connect the No. 5 terminal of
the ignition switch connector
to the battery positive termi -
nal, and connect the No. 3 ter-
minal to the battery negative
terminal.
2. Turn the ignition switch 10
ACe
(I),
then push it.
3. Check the key interlock sole -
noid operation . A clicki ng
sound shou ld be heard while
pushing the ignition key.
Does the key interlock
solenoid operate properly?
YES
To page 14--92
NO
NO
IGNITI ON SWITCH 6P CONNECTOR
KEY lOCK
SOL ACC PUSH SW IWHT /YElI
IWHT/BLU I
Wife
S ide of female terminals
Faulty key interlock loleRoid.
Replace
the
ignftion
key cylinderl
steering lock assembly.
KEY lOC KSOl
UI IWHT/Bl
Faulty key interlock switch .
Replace the ignition key cylinderl
steering
lock
assembly.
.BKEY LOCK
IWHT/GRNI
Icont'd)
14-91