Honda CR-V 1997 Service Manual page 610

Electrical Troubleshooting ('98 - 00 Models)
Troubleshooting Flowchart - Lock-up Control Solenoid Valve A (cont'd)
From page 14-93
Check for continuity between the
820 terminal and body ground,
and between the 822 terminal
and body ground.
Is there continuity?
YES
Check Lock-up Control Solenoid
Valve A for I Short Circuit:
, . Disconnect the 2P connector
from the lock-up control
solenoid valve AlB assembly.
2. Check for continuity between
the 01 and 820 or 822 termi-
nals.
Is there continuity?
NO
Measure Lock-up Control Solenoid
Valye A Resistance
at the Solenoid
Connector.
Measure the resistance between
the No.2 terminal of the lock-up
control solenoid valve
AlB
assembly connector and body
ground.
Is the resistance 12 - 25
D?
YES
Check for open in the wire
between the D1 terminal and the
lock-up control solenoid valve A.
14-94
NO
YES
NO
AI32PI
PCM CONNECTORS
BI25PI
Wire side of female terminals
Repair open in the wires
between the
B20
and B22 termi-
nail and ground
(G1011.
C 131PI D 11SPI
.-------------~Q)------------~ r~
A132P1
B I2SPI
C 131PI
LG1 IBRN/BLKI LG2 IBRN/BLKI
Repair short to ground in the wire
betw .. n the
D1
terminal and the
lock-up control solenoid valve A.
Replace the lock-up control
solenoid valve AlB assembly.
LOCK-UP CONTROL SOlENOID
VALVE AlB ASSEMBLY CONNECTOR
LCAIYELI
Terminal side of male terminals