Honda CR-V 1997 Service Manual page 1363

From page 24-64
I
Check for a short to ground in the SAS main harness:
1. Disconnect the battery negative cable, then disconnect
the positive cable, and wait for three minutes.
2. Disconnect the driver's airbag 2P connector (and discon-
nect both seat belt tensioner connectors).
3. Disconnect the SRS main harness l8P connector from
the SRS unit.
4. Remove the special tool (2
0)
from the SRS main harness
2P connector.
5. Check. resistance between the No. 10 terminal of the SRS
main harness
lap
connector and ground, and between
the No. 14 terminal of the SRS main harness
lap
connec-
tor and ground. There should be 1 MO or more.
Is the resistance as specified?
YES NO
I
Faulty SAS unit; replace the SAS unit (see page 24-951-
I
I
Sh~rt
to ground in the SAS main harness; replace the SAS
I
maIO harness.
SRS MAIN HARNESS
'SP CONNECTOR
SRS UNIT
Wire side of temale
terminals
24-65