Reassembly - Honda CR-V 1997 Service Manual

Reassembly
1.
Apply CVT fluid to the rubber of the oil strainer, then
install the oil strainer, the magnet, and the oil pump
pin to the differential carrier.
2.
DIFFERENTIAL CARRIER
ASSEMBLY
MAGNET
Align the oil pump pin with the groove of the rear oil
pump in the pump body assembly, then install the oil
pump body assembly to the differential carrier assem-
bly.
DIFFERENTIAL CARRIER
ASSEMBLY
OIL BODY ASSEMBLY
REAR OIL PUMP
OIL PIN
3. Tighten the oil pump body assembly mounting
bolts.
4. Install the oil pump drives haft by aligning the pro-
jection of the oil pump driveshaft with the groove of
the front oil pump in the oil pump body assembly.
I
~
Install in this direction.
Projection
THRUST NEEDLE BEARING
OIL PUMP
DRIVESHAFT
5. Install the thrust needle bearing.
6. Install the pressure plate assembly by aligning the
projection of the pressure plate with the groove of
the oil pump drives haft.
PRESSURE PLATE
OIL PUMP
DRIVESHAFT
(cont'd)
15-23