Wiring Precautions
•
Never attempt to modify, splice or repair SRS wiring.
NOTE: SRS wiring can be identified by special yellow
outer covering.
•
Be sure to install the harness wires so that they are not
pinched or interfering with other parts.
•
Make sure all SRS ground locations are clean and
grounds are securely fastened for optimum metal-to-
metal contact. Poor grounding can cause intermittent
problems that are difficult to diagnose.
Spring-loaded Lock Connector with
Built-in Short Contact
The driver's airbag/front passenger's airbag and seat
belt tensioners have a spring-loaded lock connector with
a built-in short contact. When this connector is discon-
nected, the power terminal and the ground terminal in
the airbag connector are automatically shorted.
Connector halves disconnected:
POWER TERMINAL
GROUND TERMINAL
CONTACT
POINT
SHORT CONTACT
CABLE REEL CONNECTOR
Connector halves connected:
POWER TERMINAL
CABLE REEL
CONNECTOR
GROUND TERMINAL
NO CONTACT
SHORT CONTACT
24-21