Honda CR-V 1997 Service Manual page 1043

Seats
Front Seat Cover Replacement (cont'd)
5. Remove the headrest guide, then remove the seat-
back cover.
SEAT-BACK
HEADREST
GUIDE
~
4~
"
HEADREST
GUIDE
6. Installation is the reverse of the removal procedure.
NOTE: To prevent wrinkles when installing a seat-
back cover, make sure the material is stretched evenly
over the pad before securing the hook and inside
springs.
Seat cushion cover:
1, Remove the seat cushion (see pages 20-58, 59).
2. Remove the clips from under the seat cushion, then
loosen the seat cushion cover.
CLIP
II..
~~=iIf,l/X
0 0 0 0 0 0
r
O D 0 D O
l
V --..:
rf10 0 00~!
, . .!;
~
If
~ ~EAT
-'\
~
CUSHION
l.,I \
COVER
~-----~
\
20-62
3. Pull back the edge of the seat cushion cover all the
way around, then release the clips, and remove the
seat cushion cover.
SEAT CUSHION
COVER
WlRfS
(Pad side)
4. Installation is the reverse of the removal procedure.
NOTE:
• To prevent wrinkles when installing a seat cush-
ion cover, make sure the material is stretched
evenly over the pad before securing the clips.
• Replace the released clips with new ones.
UPHOLSTERY RING PLIERS
(Commercially available)
8EATFRAME
~t;;..-'r---
NEW CLIP
SEAT
COVER