Shift Lock Solenoid Test - Honda CR-V 1997 Service Manual

Shift Lock Solenoid Test
SRS components are located in this area. Review the SRS
component locations, precautions, and procedures in the
SRS
section
(24)
before performing repairs or service.
1.
Remove the instrument panel lower cover (see
sec~
tion 20).
2. Remove the steering column covers (see section 17).
3. Disconnect the shift lock solenoid 2P connector.
4. Connect the No.1 terminal of the shift lock solenoid
connector to the banery positive terminal, and con-
nect the No.2 terminal to the battery negative ter-
minal.
5. Check that the shift lever can be moved from the
(f)
position. Release the battery terminals from the
shift lock solenoid connector. Move the shift lever
back to the@ position, and make sure
it
locks.
NOTE: Do not connect power to the No.2 H termi·
nal (reverse polarity) or you will damage the diode
inside the solenoid.
2P CONNECTOR
\
male terminals
SHIFT LOCK
SOLENOID
6. Check that the shift lock releases when the release
lever is pushed, and check that it locks when the
release lever is released.
SHIFT LOCK
SOLENOID
I
RELEASE LEVER
7. If the solenoid does not work, replace it.
14-147