Honda CR-V 1997 Service Manual page 785

Disassembly/Reassembly - '99 - 00 Models
SRS components are located in this area. Review the SRS component locations, precautions, and procedures in the SRS
section
(24)
before performing repairs or service.
Apply silicone grease to these parts:
• Movable parts of the shift lever.
• Movable parts of the shift lock mechanism.
• Sliding surfaces on the detent ofthe control checker and detent guide.
NOTE: Adjust the clearance between the %
switch wires and the edge of the shift lever control bracket after reassembly
(see page 14-2701.
SHIFT LOCK
RELEASE LEVER
SHIFT LOCK SOLENOID
SCREW
",~
2.5 N'm (0.25 kgf·m. 1.8 IbUtl
~ ~ ~
. .
DETENT SPRING
~
")
SHIFT LEVER CONTROL \
~~
BRACKET /
~I~
PARK PIN SWITCH -
OlD SWITCH
CONNECTOR
,
,
SHIFT LOCK SOLENOID
SPRING
SCREW
2.5 N·m 10.25 kgf·m. 1.8 IbUtl
SHIFT LOCK SOLENOID
PLUNGER
SHIFT LOCK EXTENSION
DETENT GUIDE
SCREW
L
9.3 N·m 10.95 kgf·m, 6.9 Ibl-ftl
"9l~?Jjr---~~;;:?'=::'
Zl' ! i3}
2.5 N·m (0.25 kgf·m,
e)
0
1.8 IbUtl
SHIFT LOCK RELEASE --...
LEVER SPRING
HARNESS CLAMP
BRACKET
SHIFT LEVER
LINK
9.3 N·m (0.95 kgf·m,
6.91bUtl
CABLE
ADJUSTER
LOCKNUT
7 N·m (0.7 kgf·m.
5 IbUtl
CUSHION
~
BALL
SHIFT LEVER
BUSHING
PARK PIN
SWITCH
\ CONTROL CHECKER
/ ' SHIFT LEVER KNOB
/ 6-12N·m
(0.6 - 1.2 kgf·m,
4 - 8.7 IbUtl
'----.... - OlD SWITCH
14-269