Hood Release Handle Replacement; Hood Latch Replacement - Honda CR-V 1997 Service Manual

Hood Release Handle Replacement
NOTE: Take care not to bend the opener cable.
Remove the left kick panel (see pages 20-41).
... : Bolt locations, 2
6x 1.0mm
9.8 N'm (1.0 kgf·m,
7.2 Ibf.ftl
HOOD OPENER
CABLE
HOOD RELEASE
HANDLE
Installation is the reverse of the removal procedure.
NOTE: Make sure the hood opens properly.
Hood Latch Replacement
NOTE: Take care not to bend the opener cable.
Remove the front grille (see page 20-77).
...: Bolt locations, 3
@mn
6xl.0mm
9.8 N·m (1.0 kgf·m,
7.2lbf.ftl
-
CABLE
(see page 20-93)
Installation is the reverse of the removal procedure.
NOTE:
• Grease each location of the hood latch as indicated
by
the arrows.
• Make sure the opener cable is connected properly.
• Make sure the hood locks properly.
• Adjust the hood latch alignment (see page 20-761.
..-€iB
20-95