Honda CR-V 1997 Service Manual page 1062

Adjustment
NOTE :
• After adjusting the tailgate doof, adjust the rear hatch glass.
• Loosen the striker mounting bolts slightly.
• Remove the rear spoiler, and remove the support strut from body side.
1. Loosen the rear hatch glass mounting nuts.
2. Adjust the rear hatch glass so there are equal gaps between the rear hatch glass, the taillights, and the tailgate door.
NOTE: If necessary, loosen the rear hatch glass hinge mounting nuts and move the rear hatch glass backward or for-
ward to fit the rear weatherstrip and tailgate door weath erstrip.
REAR HATCH
GLASS HINGE
REAR HATCH GlASS HINGE
MOUNTING NUT
6x 1.0 mm
9.8 N·m 11 .0 kgf·m,
1.2 Ibf·ft)
Remove the rear edge
of the headliner
!see page 20-44).
Taillight side:
~
TAILUG~
NOTE : Adjust for equal gaps
between the right and left.
REAR HATCH GLASS
MOUNTING NUT
6x1 .0mm
9.8
N·m
11
.0 kgf·m,
1.2Ibf·ft)
REAR HATCH GLASS
TAILLIGHT
REAR HATCH
GLASS HINGES
REAR HATCH GLASS
Tailgate door side:
TAILGATE DOOR
WEATHERSTRIP
TAiLUGHT
About
1mm
(0.27 in.)
Icont'd)
20-81