Honda CR-V 1997 Service Manual page 470

Disassembly
1. Securely clamp the countershaft assembly in a
bench vise with wood blocks.
it
HISEL
TAB
LOCKNUT
\ - Replace.
SPRING WASHER
2. Raise the locknut tab from the groove in the coun-
tershaft, then remove the locknut and the spring
washer.
3. Remove the ball bearing using a press as shown .
PRESS
•
GEAR
GEAR
4. Re move the friction damper from the spacer using a
press and a socket.
PRESS
..
SOCKET
SPACER
FRICTION DAMPER
Inspect fo r wear and damage.
5. Support 1st gear on steel blocks, and press the
counters haft out of 3rd gear.
PRESS
•
GEAR
1ST GEAR
13-31