Honda CR-V 1997 Service Manual page 1388

Front Passenger's Airbag
Replacement (cont'd)
CAUTION: Be sure to Install the SRS wiring so that
it
is
not pinched or interfering with other parts.
6. Place the new fro nt passenger's airbag into th e
dashboard . Tighten the fro nt passenger ' s airbag
mounting nuts.
FRONT PASSENGER'S
AIRBAG
24-90
FRONT PASSENGER'S
AIRBAG MOUNTING NUTS
9.B N·m 11 .0 kgf·m, 7.2Ibf.ft)
Repl ace.
7. Attach the airbag connector to the connector hold-
er, then reinstall the glove box.
FRONT PASSENGER'S
AIRBAG 2P CONNECTOR
SRS MAIN HARNESS
2P CONNECTOR
8. Connect the battery positive cable, then connect the
negative cable.
9. After installing the airbag, confirm proper system
operation:
Turn the ignition switch ON (II); the SRS indicator
light should come on for about si x seconds and
then go off.