Honda CR-V 1997 Service Manual page 1051

Seats
Rear Seat Cover Replacement (cont'd)
5. Remove the headrest guide and latch knob collar,
then remove the seat-back frame ,
6.
SEAT-BACK
FRAME
~
PAD
HEADREST
GUIDE
LATCH KNOB
COLLAR
AI'
HEADREST
GUIDE
Pull back the edge of the seat-back cover all the way
around, release the clips, and remove the seat-back
cover.
SEAT-BACK COVER
WIRE
(Pad side)
'--Ir--4=0;1-----+--...L./
(Leather seat-back
cov er on ' 00 model)
CLIPS
(Leather seat·back
cover on '00 model)
WIRE
Wad side, leather sea t~ back
cover on '00 model)
7. Installation is the reverse of the removal procedure.
NOTE:
• To prevent wrinkles when installing a seat-back
cover, make sure the material is stretched evenly
over the pad before securing the hook and clips.
• Replace the released clips with new ones.
20-70
Seat cushion cover.
1. Remove the seat cushion (see page 20-65),
2. Remove th e seat cushion latch and seat cushion
strap (see page 20-66).
3. Pull back the edge of the seat cushion mat, then
release all of the clips.
D D
o
o
SEAT CUSHION
MAT
t
+Jo,.....-CLIP
SEAT
CUSHION
COVER
4. Pull back the edge of the seat cushion cover all the
way around. release the clips, and remove the seat
cushion cover.
CLIPS
SEAT CUSHION
COVER
.' ,
:
WIRE
(Pad side)