12. Install the special tools to the companion flange,
then tighten the locknut to specified torque.
TORQUE: 118 N'm (12.0 kgf·m, 87Ibf.ft)
HOLDER HANDLE
07JAB - 001020A
FLANGE HOLDER
07RAB - TB4010B
8x1.25mm
32 N·m 13.3 kgf·m, 24 Ibf.fl)
13.
Stake the locknut tab into the groove in the clutch
guide.
14. Install the breather tube.
BREATHER TUBE
DRAIN PLUG
47 N·m 14.8 kgf·m, 35 Ibf.fl)
15.
Install the drain plug and the oil filler plug with new
washers.
15-25