Transfer Drive Gear Bearing Replacement; Transfer Driven Gear Shaft Bearing Replacement - Honda CR-V 1997 Service Manual

Transfer Drive Gear Bearing
Replacement
NOTE: Coat all parts with MTF during reassembly .
1. Remove the tape red roller bearing from the transfer
drive gear using the special tools and a press.
DRIVER
077~
- 0010000
TAPERED ROLLER
BEARfNG
BEARING SEPARATOR.
0-' 1/2"
(Commercially available)
PRESS
ATTACHMENT.
37 x40mm
07746 - 0010200
2. Install the new tapered roller bearing in the transfer
drive gear using the special tools and a press.
ATTACHMENT.
"Ox 50 mm
07LAD - PW50601
PRESS
ATTACHMENT
TRANSFER DRIVE
GEAR
Transfer Driven Gear Shaft
Bearing Replacement
NOTE: Coat all parts with MTF during reassembly .
1. Remove the tapered roller bearing from the transfer
driven gear shaft using a press and a collar.
TRANSFER DRIVEN
GEAR SHAFT
BEARING SEPARATOR.
0-' 112"
(Commercially available)
PRESS
COLLAR
2. Install the 35 mm thrust shim on the transfer driven
gear shaft.
3. Install the new tapered roller bearing on the transfer
driven gear shaft using the special tools and a press.
NOTE: Use old transfer spacer for bearing installa-
tion , then discard it.
TAPERED ROLLER
BEARING
TRANSFER DRfVEN
GEAR SHAFT
PRESS
•
DRIVER 40 mm 1 .0 .
07746 - 0030100
OLD TRANSFER
SPACER
13-49