Fenderwell; Front Wheelwell Protector Replacement; Inner Fender Replacement - Honda CR-V 1997 Service Manual

Fenderwell
Front Wheelwell Protector
Replacement
NOTE:
• Take care not to scratch the front wheelwell protector
and body.
• Use a T30 Torx bit to remove the Torx screw.
.. : Screw locations
A" , 3 8"',1
~
Q)nm
6x1.0mm
7.2 Ibf.ft}
:lJj:l> _ _ _ _
9_.S_N_.m_I'_.o_k
9
_'._m •
....J
[> :
Clip locations. 5
NOTE: Before removing the
front wheelwell protector, rem ove
the screw from the front
bumper and lower the front
bumper.
FRONT WHEELWELL
PROTECTOR
Installation is the reverse of the removal procedure.
NOTE: If necessary, replace any damaged clips.
Inner Fender Replacement
NOTE: Take care not to scratch the body.
Remove the front wheelwell protector.
.. : Screw locations, 4
[> :
Clip loeations, 6
INNER FENDER
Installation is the reverse of the removal procedure.
NOTE: If necessary, replace any damaged clips.
20-89