Shift Lock Solenoid Replacement - Honda CR-V 1997 Service Manual

Interlock System
Shift Lock Solenoid Replacement
SRS components are located in this area. Review the SAS
component locations, precautions, and procedures in the
SRS section (24) before performing repairs or service.
1. Remove the instrument panel lower cover (see sec-
tion 20).
2. Remove the upper and lower steering column cov-
ers (see section 17).
3. Remove the flange nuts and bolts securing the
steering column, then lower the steering column .
4. Disconnect the shift lock solenoid and the park pin
switch connectors.
5. Remove the bolts securing the shift lever assembly,
then remove the shift lever assembly.
6. Remove the screws securing the shift lock solenoid,
then remove the shift lock solenoid.
SHIFT LOCK
SOLENOID PLUNGER
/
SCREW
SHIFT LOCK
SOLENOID PLUNGER
SHIFT LOCK
EXTENSION
2.5 N·m (0.25 kgf·m. 1.8lbf.ftl
14-148
7. Install the new shift lock solenoid by aligning the
joint of the shift lock solenoid plunger with the tip
of the shift lock extension
8. Secure the shift lock solenoid with the screws.
9. Install the shift lever assembly in the reverse order
of the removal.
10 Check the operation of the shift lever and the shift
lock.