Honda CR-V 1997 Service Manual page 753

Transfer Drive Gear Bearing
Replacement
NOTE: Coat all parts with ATF during reassembly.
1. Remove the tapered roller bearing from the transfer
drive gear using the special tools and a press.
DRIVER
07749 - 0010000
BEARING SEPARATOR,
0-41/2-
(Commerciallvavailable)
PRESS
ATTACHMENT
37x40mm
07746 - 0010200
2. Install the new tapered roller bearing in the transfer
drive gear using the special tools and a press.
PRESS
DRIVER
07749 - 00"00110
TR'U.j=IfER DRIVE
GEAR
Transfer Driven Gear Shaft
Bearing Replacement
NOTE: Coat all parts with ATF during reassembly.
1. Remove the tapered roller bearing from the transfer
driven gear shaft using a press and a collar.
BEARING SEF'ARiUO'R,
0-41/2"
(Commerciallyavailablel
PRESS
2. Install the 35 mm thrust shim on the transfer driven
gear shaft.
3. Install the new tapered roller bearing on the transfer
driven gear shaft using the special tools and a
press.
TAPERED ROllER
TRANSFER DRIVEN
GEAR SHAFT
PRESS
DRIVER 40
mm
1.0.
-oo3Gloo
ATTACHMENT,
3SmmtD.
07746 - 0030400
14-237