Power Steering Hoses, Lines
Fluid Leakage Inspection
HOSES and LINES
•
Inspect
hoses
for damage, leaks, interference and twisting.
•
Inspect fluid lines for
damage,
rusting and leakage.
•
Check for leaks at hose and line joints and connections.
FEED HOSE
37 N·m 13.8
kgf·m,
27 IbHtl
RETURN LINE JOINT
28 N'm 12.9 kgf·m
,
21 Ibf·ftl
CYLINDER LINES
17 N'm 11 .7 kgf'm
,
12 Ibf·ftl
POWER STEERING PRESSURE SWITCH
12 N'm 11 .2 kgf'm, 8.7 Ibf·ftl
FEED HOSE
11 N'm
11.1
kgf·m,
BlbHtl
Ibl
SUCTION HOSE
PUMP ASSEMBlY
Check fo
r
leaks
at the pump
seal, inl et an
d
outlet fittings
.
Replacement
Note these items during
installation:
• Connect each hose to the corresponding line securely
until it conta cts the stop on the line. Install the clamp
or adjustabl
e
clamp at
the
specified distance from the
hose end as sh
own.
• Check all clamps for deterioration or
deformation;
replace with the clamps new ones if
necessary.
•
Add the recommended p ower steering fluid to the
specified level on the reservoir and check for leaks.
ADJUSTABLE HOSE CLAMP:
(0)
•
Positio
n
the
adjustable hose clamps at the points
indicated by
(a)
in the drawing above.
•
Slide the
hose
over the line until it contacts the stop.
2.5-5.5 mm
(0.01 - 0.22 inl
2.0
-
4.0
mm
(0.08 - 0.16 inl
HOSE
GEARBOX
ond
VALVE BODY UNIT
Check for leaks at the mating
surface
an
d fla
re nut
connections.
BOOT
Check
for
leaks.
mrURN LINE
HOSE
ClAMP:
(bl
•
Position the hose clamps at the points indicated by
(bl in the drawing
above.
•
Slide the hose over th
e
line until it contacts the stop.
2.S-S.Smm
10.01 - 0.22
inl
17-23