Detent Spring Replacement - Honda CR-V 1997 Service Manual

Detent Spring Replacement
1. Install the detent spring on the shift lever control
bracket. and install the screw loosely.
2. Sh ift the shift lever to
00
position.
3. Insert
a
0.5
mm
(0.02 inl wire gap gauge between
the control checker detent and the shift lever, then
hold the shift lever against the
00
position in the
control checker.
LEVER
CHECKER
GAP GAUGE
0.5 mm (0.02 in)
4, Put the detent spring roller in
~
position on the
detent guide, then tighten the screw to the specified
torque .
'97 - 98 Models:
DETENT SPRING
ROLLER
DETENT SPRING
'99 - 00 Models:
DETENT SPRING
ROLLER
(6
positions)
DETENT SPRING
SHIFT LEVER
SCREW
2.5 N·m 10.25 kgf·m, 1.8
Ibf.ftl
SCREW
2.5 N·m 10.25 kgf .... , 1.8
Ibf.f.)
14-271