Honda CR-V 1997 Service Manual page 705

1. Remove the transfer assembly from the torque con-
verter housing. (4WD)
2. Remove the mainshaft speed sensor from the trans-
mission housing.
3. Remove the transmission housing mounting bolts,
transmission hanger, and connector bracket.
4. Align the spring pin on the control shaft with the
transmission housing groove by turning the control
shaft.
HOllSINIG PULLfR
01HAC - PK40102
COf~I~L
SHAFT
TRJINS'MI.!;SKIN HOUSING
5. Install the special tool over the mainshaft, then
remove the transmission housing as shown.
6. Remove the countershaft reverse gear collar, needle
bearing, and counters haft reverse gear from the
countershaft.
7. Remove the lock bolt securing the reverse shift fork,
then remove the reverse shift fork and reverse
selector together.
8. Remove the countershaft sub-assembly and main-
shaft sub-assembly together.
MAINSHAFT
SUB·ASSEMBL Y
9. Remove the differential assembly.
COUNTERSHAFT
14-189