Headlights; Daytime Running Lights Resistor Test (Canada) - Honda CR-V 1997 Service Manual

Lighting System
Daytime Running Lights Resistor
Test (Canada)
CAUTION: The daytime running lights resistor becomes
very hot when the daytime running lights are on; do not
touch
it
or the attaching hardware immediately after
the lights have been turned off.
1. Di sconnect the 3P connector from the resistor.
DA VTIME RUNNING
LIGHTS RESISTOR
3P CONNECTOR
2. Measure the resistance between the resistor termi -
nal No.1 (or No.2) and the power terminal No. 3.
Resistance: 1.0 - 2.0 !l
3. Replace the resistor w ith a new one if any of the
resistances are beyond specification.
23-80
Headlights
Replacement
CAUTION: Halogen headlights become very hot in use;
do not touch them or the attaching hardware immedi-
ately after they have been turned off.
, . Remove the front bumper (see section 20).
2. Remove the mounting bolts.
3. Disconnect each connector, then remove the head-
light assembly.
3P CONNECTOR
2P CONNECTOR
f
HEADLIGHT ASSEMBLY
HEADUGHT: 60/55 W
TURN SIGNAL/SIDE MARKER LIGHT:
21/8 W 1'97 model)
27/8 W 1'98 - 00 model.1
PARKING UGHT: 5 W 1'97 modell
3CP ('98 - 00 models)