Honda CR-V 1997 Service Manual page 1343

From page 24-43
lei
I
ChKk for a short to ground in the main wlr. harness:
1. Disconnect the dashboard wire harness 24P connector
from the main wire harness.
2. Check resistance between the No.5 terminal of the dash-
board wire harness 24P connector and ground. There
should be 1 MO or more.
Is the resistance as specffied7
YES
NO
I
Short to ground in the dashboard wire harness; repair
I
the dashboard wire harness.
Check for a short to ground in the SRS main harness:
,
.
Disconnect the SRS main haffless 3P connector from the
main wire harness.
2. Check resistance between the No.1 terminal of the SRS
main harness 3P connector and ground. There should
be
1 MO or more.
Is the resistance as specified?
YES
NO
I
Short to ground in the main wire harness; repair the
I
main wire harness.
I
Short to ground in the SRS main harness; ,.pfKe the SRS
I
main ham ass.
MAIN WIRE
HARNESS 24P CONNECTOR
DASHBOARD WIRE
HARNESS
24P CONNECTOR
DASHBOARD WIRE HARNESS
24P CONNECTOR BLU
1 2 3 ..
9 10 11 12 15 16 17
Wire side of female
terminals
MAIN WIRE HARNESS
3P CONNECTOR
CSD3
SRS MAIN HARNESS
3P CONNECTOR
UNDER-DASH
FUSE/RELAY BOX
SRS MAIN HARNESS
3P CONNECTOR
C803
Wire side of female
terminals
(co nt'dl
24-45