Honda CR-V 1997 Service Manual page 1367

From page 24-68
I
Check for a short to another wire or decreased resistance in
the side wire harness:
1. Disconnect the left side wire harness 2P connector from
the SRS main harness 2P connector.
2. Connect the special tool (2
OJ
to the SRS main harness
2P connector.
3. Erase the DTC memory.
4. Read the DTC.
Is DTC 3-3 indicated?
YES NO
I Short to another wire or decreased resistance in the left
J
side wire harness; replace the harness,
Check for a short to another wire or decreased resistance in
the SRS main harness:
1. Disconnect the negative battery cable, and wait for three
minutes.
2. Disconnect the driver's and front passenger's airbags,
and front passenger's seat belt tensioner connectors (see
page 24-23).
3. Disconnect the SRS main harness l8P connector from
the SRS unit.
4. Disconnect the special tool (2
OJ
from the SRS main harness
2P connector.
5. Check resistance between the NO.4 and No. 11 terminals of
the SRS main harness 18P connector. There should be
1 MO or more.
Is the resistance as specified?
YES
NO
I
Faulty SRS unit; replace the SRS unit (see page 24-95).
I
I
Short to another wire or decreased resistance in the SRS
I
main harness; replace the SRS main harness.
LEFT SIDE WIRE
_\~~~~~
HARNESS
2P CONNECTOR '->Vv~~
SRSMAIN
HARNESS
2P CONNECTOR
SRS SIMULATOR
LEADC
01TAZ - SZ5011A
and SRS INFLATOR
SIMULATOR
/
12nJACKI
07SAZ - TB4011A
~
SRS UNIT
SRS MAIN HARNESS
lap CONNECTOR
4 S 6 7 S 9 C S 0 6
10 11 12 13 1-4 lS 16 17 lS
Wire side of female
terminals.
24-69