Ping Ethernet; Show Ethernet Cfm Domain - Dell S4810 Reference Manual

ping ethernet

Send a loopback message.
S4810
Syntax
ping ethernet domain [name l level] ma-name ma-name remote
{dest-mep-id | mac-addr mac-address} source {src-mep-id | port
interface}
Parameters
name | level
ma-name ma-
name
dest-mep-id
mac-addr
mac-address
src-mep-id
port interface
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0

show ethernet cfm domain

Display maintenance domain information.
S4810
Syntax
show ethernet cfm domain [name | level | brief]
802.1ag
Enter the domain name or level.
Enter the keyword ma-name and then enter the maintenance
association name.
Enter the MEP ID that is the target of the ping.
Enter the keyword mac-addr and then enter the MAC
address that is the target of the ping.
Enter the MEP ID that originates the ping.
Enter the keyword port and then enter the interface that
originates the ping.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
173