Ip Ftp Password - Dell S4810 Reference Manual

ip ftp password

Specify a password for outgoing FTP connections.
S4810
Syntax
ip ftp password [encryption-type] password
To remove a password and return to the default setting, use the no ip ftp
password [password] command.
Parameters
encryption-
type
password
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage The password is listed in the configuration file; you can view the password by
Information entering the show running-config ftp command.
Use the ip ftp password command when you use the ftp: parameter in the
copy command.
Related
copy
Commands
Control and Monitoring
(OPTIONAL) Enter one of the following numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for a hidden text password
Enter a string up to 40 characters as the password.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
— copy files.
109