Dell S4810 Reference Manual page 73

Usage
Restoring factory defaults deletes the existing startup configuration and all
Information
persistent settings (stacking, fanout, and so forth).
When restoring all units in a stack, all the units in the stack are placed into stand-
alone mode.
When restoring a single unit in a stack, that unit placed in stand-alone mode. No
other units in the stack are affected.
When restoring units in stand-alone mode, the units remin in stand-alone mode
after the restoration. After the restore is complete, the units power cycle
immediately.
Example (all
Dell#restore factory-defaults stack-unit all clear-all
stack units)
**************************************************************
* Warning - Restoring factory defaults will delete the
existing *
* startup-config and all persistent settings (stacking,
fanout, etc.)*
* All the units in the stack will be split into standalone
units. *
* After restoration the unit(s) will be powercycled
immediately. *
* Proceed with caution ! *
**************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram
------------------------
0
1
2
3
4
5
Power-cycling the unit(s).
Dell#
Example (single
Dell#restore factory-defaults stack-unit 0 clear-all
stack)
**************************************************************
* Warning - Restoring factory defaults will delete the
existing *
* startup-config and all persistent settings (stacking,
fanout, etc.)*
* After restoration the unit(s) will be powercycled
immediately. *
* Proceed with caution ! *
**************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram
------------------------
0
Power-cycling the unit(s).
Dell#
File Management
CAUTION: There is no undo for this command.
Config
Success Success
Success Success
Success Success
Not present
Not present
Not present
Config
Success Success
73