Traceroute Cache Size; Traceroute Ethernet - Dell S4810 Reference Manual

traceroute cache size

Set the size of the link trace cache.
S4810
Syntax
traceroute cache size entries
Parameters
entries
Defaults 100 entries
Command ETHERNET CFM
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0

traceroute ethernet

Send a linktrace message to an MEP.
S4810
Syntax
traceroute ethernet domain [name | level] ma-name remote {mep-
id mep-id | mac-addr mac-address}
Parameters
domain name |
level
ma-name ma-
name
mepid mep-id
mac-addr
mac-address
802.1ag
Enter the number of entries the link trace cache can hold.
The range is from 1 to 4095 entries.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Enter the keyword domain then the domain name or level.
Enter the keyword ma-name then the maintenance
association name.
Enter the MEP ID that is the trace target.
Enter the MAC address of the trace target.
181