Dell S4810 Reference Manual page 136

Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.4
Version 8.3.11.1
Version 7.6.1.0
Usage If there are no fiber ports in the unit, just the header under show inventory media
Information displays. If there are fiber ports but no optics inserted, the output displays Media
not present or accessible.
Example
Dell#show inventory
(S6000)
System Type
System Mode
Software Version
Unit Type
Rev
---------------------------------------------------------------
------------------------------------------------------
* 0
CN-08YWFG-28298-39Q-0015 A00
CN-0T9FNW-28298-39Q-0005 A00
CN-0MGDH8-28298-39Q-0009 A00
CN-0MGDH8-28298-39Q-0007 A00
CN-0MGDH8-28298-39Q-0008 A00
* - Management Unit
Software Protocol Configured
--------------------------------------------------------------
Example
Dell#show inventory media
Slot
Number
136
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Output expanded to include Piece Part ID (PPID) and eSR4
optics.
Introduced on the Z9000.
Introduced this version of the command for S-Series. S-
Series output differs from E-Series.
Piece Part ID
S6000-01-FE-32T
0 S6000-PWR-AC
0 S6000-FAN
0 S6000-FAN
0 S6000-FAN
LLDP
Port Type
F10Qualified
: S6000
: 1.0
: 9-4(0-168)
Serial Number Part Number
Rev Svc Tag
NA 08YWFG
24N1VS1 463
NA 0T9FNW
NA NA
NA 0MGDH8
NA NA
NA 0MGDH8
NA NA
NA 0MGDH8
NA NA
Media
Exprs Svc Code
A00
414 838 5
A00
A00
A00
A00
Serial
Control and Monitoring