Debug Dot1X; Dot1X Auth-Fail-Vlan - Dell S4810 Reference Manual

debug dot1x

Display 802.1X debugging information.
S4810
Syntax
debug dot1x [all | auth-pae-fsm | backend-fsm | eapol-pdu]
[interface interface]
Parameters
all
auth-pae-fsm
backend-fsm
eapol-pdu
interface
interface
Defaults Disabled
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.4.1.0

dot1x auth-fail-vlan

Configure an authentication failure VLAN for users and devices that fail 802.1X authentication.
S4810
Syntax
dot1x auth-fail-vlan vlan-id [max-attempts number]
184
Enable all 802.1X debug messages.
Enable authentication PAE FSM debug messages.
Enable backend FSM debug messages.
Enable the EAPOL frame trace and related debug messages.
Restricts the debugging information to an interface.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the C-Series and S-Series.
802.1X