Show Alarms - Dell S4810 Reference Manual

Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage If you do not specify parameters and enter service timestamps, it appears as service
Information timestamps debug uptime in the running-configuration.
To view the current options set for the service timestamps command, use the
show running-config command.

show alarms

View alarms currently active in the system.
S4810
Syntax
show alarms [threshold]
Parameters
threshold
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
126
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
(OPTIONAL) Enter the keyword threshold to display the
temperature thresholds in Celcuis for each level.
EXEC
EXEC Privilege
Control and Monitoring