Database Hold-Time; Disable - Dell S4810 Reference Manual

database hold-time

Set the amount of time that data from a missing MEP is kept in the continuity check database.
S4810
Syntax
database hold-time minutes
Parameters
minutes
Defaults 100 minutes
Command ECFM DOMAIN
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0

disable

Disable Ethernet CFM without stopping the CFM process.
S4810
Syntax
disable
Defaults Disabled
Command ETHERNET CFM
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
802.1ag
Enter a hold-time. The range is from 100 to 65535 minutes.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the S4820T.
Introduced on the Z9000.
167