Dell S4810 Reference Manual page 97

Version 7.6.1.0
Version 7.5.1.0
E-Series
do
Allows the execution of most EXEC-level commands from all CONFIGURATION levels without returning
to the EXEC level.
S4810
Syntax
do command
Parameters
command
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.1.1.0
Usage The following commands are not supported by the do command:
Information
•
•
•
Control and Monitoring
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
Enter an EXEC-level command.
CONFIGURATION
INTERFACE
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
enable
disable
exit
97