Dell S4810 Reference Manual page 78

Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Example
Dell#show os-version
RELEASE IMAGE INFORMATION :
---------------------------------------------------------------
------
S-Series: SI 9-4(0-50) 49100764 Mar 6 2014 23:47:48
TARGET IMAGE INFORMATION :
---------------------------------------------------------------
------
BOOT IMAGE INFORMATION :
---------------------------------------------------------------
------
BOOTSEL IMAGE INFORMATION :
---------------------------------------------------------------
------
boot selector 3.1.0.2 Control Processor passed
78
• For a file on the internal flash, enter flash:// followed
by the filename.
• For a file on an FTP server, enter ftp://
user:password@hostip/filepath.
• For a file on a TFTP server, enter tftp://hostip/
filepath.
• For a file on the USB port, enter usbflash://filepath.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
Platform Version Size ReleaseTime
Type Version Target checksum
runtime 9-4(0-50) Control Processor passed
Type Version Target checksum
boot flash 3.1.1.3 Control Processor passed
Type Version Target checksum
File Management