Example For Configuring The Batch Distribution Function For An Hgmp Cluster - Huawei Quidway S5700 Series Configuration Manual - Network Management

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
3.6.6 Example for Configuring the Batch Distribution Function for
an HGMP Cluster
Networking Requirements
As shown in
the administrator switch of the cluster and other switches are member switches. The member ID
of Member-2 is 2 and the member ID of Member-3 is 3.
Member-2 and Member-3 are required to download configuration files in batches from the FTP
server.
Issue 01 (2011-10-26)
ndp enable
#
interface Vlanif10
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
#
cluster
mngvlanid 10
administrator-address 0001-0001-0001 name HUAWEI
#
ip route-static 3.0.0.0 255.0.0.0 10.0.0.1
#
snmp-agent
snmp-agent target-host trap address udp-domain 3.0.0.1 params securityname
cluster
#
return
Figure 3-8, all the Layer 2 switches belong to the same cluster. Administrator-1 is
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 HGMP Configuration
158