Checking The Configuration; Configuring The Attack Defense Function - Huawei S9700 Series Configuration Manual

S9700 Core Routing Switch
Configuration Guide - SPU
Return to the system view.
Step 5 Run:
interface interface-type interface-number.subinterface
The sub-interface view is displayed.
Step 6 Run:
l2 binding inter-vlan-bridge instance instance-id
The sub-interface is bound to the VLAN bridge instance.
A VLAN bridge instance can be bound to up to two sub-interfaces and the two sub-interfaces
must belong to the same main interface. That is, a VLAN bridge instance contains up to two
member interfaces.
When no VLAN is configured on the sub-interface, the sub-interface cannot be bound to the
VLAN bridge instance. Only one VLAN can be configured on the sub-interface where you want
to bind the VLAN bridge instance.
If a sub-interface is configured with IP address or NAT, the interface cannot be bound to a VLAN
bridge instance.
----End

2.10.3 Checking the Configuration

After the transparent firewall is configured, you can view information about the transparent
firewall.
Procedure
l
----End
Example
Run the display inter-vlan-bridge instance [ instance-id [ verbose ] ] command, and you can
view information about the transparent firewall.
# View information about all VLAN bridge instances.
<Quidway> display inter-vlan-bridge instance
Instance ID
---------------------------------------------------------------------
2
3

2.11 Configuring the Attack Defense Function

The SPU attack defense function prevents attacks to the CPU. It ensures that the server operates
normally even when it is attacked.
Issue 01 (2012-03-15)
Run the display inter-vlan-bridge instance [ instance-id [ verbose ] ] command to view
information about the transparent firewall.
Member1
XGigabitEthernet0/0/1.1
XGigabitEthernet0/0/1.2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Firewall Configuration
Member2
NULL
XGigabitEthernet0/0/1.3
53