Backing Up The Electronic Label; Configuring Electrical Port Sleep; Establishing The Configuration Task - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management
No.
3

5.3.2 Backing Up the Electronic Label

You can back up the electronic label of the S3700 to an FTP server or the CF card of the
S3700.
Procedure
l
l
----End

5.4 Configuring Electrical Port Sleep

This section describes how to configure electrical port sleep to save energy.

5.4.1 Establishing the Configuration Task

Before configuring electrical port sleep, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This helps you complete the
configuration task quickly and accurately.
Applicable Environment
When a device is working normally, you can enable electrical port sleep to save energy.
Pre-configuration Tasks
None.
Data Preparation
To configure electrical port sleep, you need the following data.
Issue 01 (2011-07-15)
Data
FTP server address, FTP user name, and password (only applicable to saving the
electronic label to an FTP server)
Back up the electronic label to the CF card.
1. Run the following command in the user view:
backup elabel [ slot slot-id ]
The electronic label is backed up to the CF card.
Back up the electronic label to an FTP server.
1. Run the following command in the user view:
backup elabel [ ftp ip-address filename username password ] [ slot slot-
id [ subcard-id ] ]
The electronic label is backed up to an FTP server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Hardware Management
46