Class-Map Rename; Match Ethertype; Match Secondary-Cos; Match Secondary-Vlan - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

class-map rename

This command changes the name of a DiffServ class. The
DiffServ class. The
<newclassname>
31 characters uniquely identifying the class (Note: the class name 'default' is reserved and must
not be used here).
Default
Format
Mode

match ethertype

This command adds to the specified class definition a match condition based on the value of the
ethertype. The <
ethertype>
ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast, netbios, novell, pppoe, rarp or as a custom ethertype value in the
range of 0x0600-0xFFFF.
Format
Mode

match secondary-cos

This command adds to the specified class definition a match condition for the secondary Class of
Service value (the inner 802.1Q tag of a double VLAN tagged packet). The value may be from 0 to
7.
Format
Mode

match secondary-vlan

This command adds to the specified class definition a match condition for the secondary VLAN
identifier value (the inner 802.1Q tag of a double VLAN tagged packet). The range from
are integers from 1 to 4094 with vlanmax being optional.
and vlanmax
Format
Mode
Quality of Service (QoS) Commands
parameter is a case-sensitive alphanumeric string from 1 to
none
class-map rename <classname> <newclassname>
Global Config
value is specified as one of the following keywords:
match [not] ethertype {<keyword> | custom <0x0600-
0xFFFF>}
Class-Map Config
match [not] secondary-cos <0-7>
Class-Map Config
match [not] secondary-vlan <vlanmin> [<vlanmax>]
Class-Map Config
202-10088-01, March 2005
is the name of an existing
<classname>
appletalk, arp,
vlanmin
11-11