Class-Map Rename; Match Ethertype - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
The class type of
for a packet to be considered a member of the class.
Note: The CLI mode is changed to Class-Map Config when this command is
Format
Mode
13.3.1.1 no class-map
This command eliminates an existing DiffServ class. The
of an existing DiffServ class ( The class name 'default' is reserved and is not allowed here).
This command may be issued at any time; if the class is currently referenced by one or
more policies or by any other class, the delete action fails.
Format
Mode

13.3.2 class-map rename

This command changes the name of a DiffServ class. The
name of an existing DiffServ class. The
sensitive alphanumeric string from 1 to 31 characters uniquely identifying the class (The
<class-map-name>
Format
Mode

13.3.3 match ethertype

This command adds to the specified class definition a match condition based on the value
of the ethertype. The
appletalk, arp, ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast, netbios, novell, pppoe,
rarp or as a custom ethertype value in the range of 0x0600-0xFFFF.
Format
Mode
13-10
indicates all of the individual match conditions must be true
match-all
successfully executed.
class-map match-all <class-map-name>
Global Config
no class-map <class-map-name>
Global Config
'default' is reserved and must not be used here).
class-map rename <class-map-name> <new-class-map-
name>
Global Config
value is specified as one of the following keywords:
<ethertype>
match ethertype
0xFFFF>}
Class-Map Config
v1.0, November 2007
<class-map-name>
<class-map-name>
<new-class-map-name>
{<keyword> |
Quality of Service (QoS) Commands
is the name
is the
parameter is a case-
<0x0600-
custom